Fracture Assessment CT

Explore CT fracture assessment, the detail it can provide about a bone injury and what to expect from your appointment and follow-up care.

Book CT Fracture Assessment
CT scanner at a diagnostic imaging centre

Scan overview

  • A fracture assessment CT provides detailed images of a specified bone or joint where additional information is needed after clinical assessment.
  • It can help define fracture configuration, displacement, joint surface involvement and selected healing concerns.
  • The scan focuses on the requested region. It is not a whole-body injury assessment or a replacement for emergency care.
  • CT uses X-rays. The expected clinical benefit and radiation exposure are considered before scanning.
  • PrivateScans CT scans start from £395, with the final price confirmed for the region, centre and examination required.

What is a fracture assessment CT?

A fracture assessment CT is a computed tomography examination planned to answer a specific question about a suspected or known broken bone. It combines X-ray measurements from different angles to produce detailed cross-sectional images.

CT can provide information that is difficult to obtain from conventional X-rays, particularly where bones overlap or a fracture has several fragments. The radiologist can review images in different planes and use selected three-dimensional reconstructions where helpful.

The examination may contribute to treatment planning or assessment of healing. It is not a treatment itself and does not determine the full management plan without clinical examination and specialist input where appropriate.

Why might CT be recommended for a fracture?

Your clinician may request CT where the findings could influence care and initial X-rays have not provided enough detail. It is not needed for every fracture.

Reasons may include:

  • Clarification of a complex fracture pattern.
  • Assessment of displacement or the position of fragments.
  • A question about involvement of a joint surface.
  • A suspected fracture that remains uncertain after initial imaging.
  • Planning an operation or another specialist treatment.
  • Assessment of healing, alignment, fusion or hardware after treatment.

The appropriate timing and protocol depend on the injury, symptoms and previous imaging. MRI or another investigation may be more useful for some occult fractures, stress injuries or soft tissue concerns.

When an injury needs urgent care

A serious accident, open wound over a suspected fracture, visible deformity, a cold or pale limb or new loss of movement or sensation needs urgent medical assessment.

Possible head, spinal or pelvic injuries may involve problems beyond the bone itself. A routine outpatient CT should not delay emergency assessment, stabilisation or treatment.

Continue any instructions already given about a splint, cast, sling, crutches or weight-bearing. Do not remove prescribed support or change restrictions simply to prepare for a scan without advice.

What can a fracture assessment CT show?

Fracture configuration

CT can help define where a fracture runs and whether it involves several fragments. This may be useful where the anatomy is complex or overlapping structures limit the X-ray views.

Displacement and alignment

The images can show how fragments are positioned relative to one another and to the surrounding joint. These findings may inform specialist decisions, but a static scan does not assess every aspect of stability during movement or weight-bearing.

Joint surface involvement

A fracture extending into a joint may need detailed assessment of the articular surface. CT can help show a step, gap or fragment relevant to planning, within the limits of the examination.

Selected occult fractures

CT can identify some fractures not apparent on an initial X-ray. No test is perfect. MRI may be more appropriate when early stress-related marrow changes or another occult injury is the main concern.

Healing and postoperative findings

For a defined question, CT may assess bony bridging, alignment, a fusion or the position of hardware. Metal can distort nearby images, although adapted techniques may help. Operation details and earlier images assist interpretation.

Associated abnormalities

Relevant adjacent structures may be visible, but routine bone CT does not exclude every ligament, tendon, nerve or vascular injury. A separate protocol or another investigation may be needed.

Which areas can be assessed?

CT may be used for selected fracture questions involving the limbs, pelvis, spine, skull or facial bones. The appropriate region and coverage must be identified in the referral.

Our dedicated pages include foot CT, ankle CT, shoulder CT, lumbar spine CT and facial bones CT.

A fracture assessment booking is not automatically a scan of the entire body or every nearby joint. Additional regions or both sides must be agreed beforehand because they can affect the protocol, duration and price.

CT, X-rays and MRI for fractures

X-rays are often the initial imaging test after an injury. They may provide sufficient information for diagnosis and follow-up without CT.

CT adds detailed bony information for a particular question. MRI provides different information about bone marrow, soft tissues and selected occult or stress injuries without ionising radiation.

A normal CT does not exclude every injury. If symptoms persist or clinical concern remains, your doctor may recommend further assessment rather than rely on imaging alone. The choice depends on the suspected injury and information needed for care.

Will I need contrast?

Many routine fracture examinations do not require intravenous contrast. An iodine-based injection may be recommended where a separate question involves blood vessels or surrounding tissues, using an appropriate protocol.

Suspected acute vascular injury needs urgent clinical care rather than a routine scan booking. A standard bone CT should not be assumed to provide a complete vascular assessment.

If contrast is proposed, the team will assess suitability, including kidney function and previous CT contrast reactions where relevant. They will explain the reason and potential side effects before giving it.

How does fracture assessment CT work?

A CT scanner has a short, ring-shaped opening and a motorised table. An X-ray source and detectors rotate around the area being examined, and a computer processes the measurements into cross-sectional images.

The radiologist reviews these images in several planes using settings suited to bone and relevant surrounding tissues. Selected 3D reconstructions can assist planning but do not mean that every tissue has been assessed in equal detail.

CT does not use a strong magnetic field for imaging. Image acquisition is usually brief, and the radiographer can see and communicate with you throughout.

Preparing for your scan

Your centre will provide instructions for the requested region and protocol. A routine non-contrast examination often needs little preparation.

Before the appointment, tell the team about:

  • Pregnancy or possible pregnancy.
  • The affected side, injury history and previous imaging.
  • Previous surgery, implants or metalwork.
  • Pain, mobility limitations and any weight-bearing restrictions.
  • Kidney disease, previous CT contrast reactions and regular medicines if contrast is being considered.

Bring relevant reports, operation details and any blood results requested. Ask about casts, splints or other prescribed support beforehand. Do not remove them without advice.

You may change clothing or remove items near the scanned area that could affect image quality. CT does not have the same magnetic restrictions as MRI. Follow specific food, drink and medicine instructions rather than altering treatment yourself.

What happens during the examination?

  1. Review and explanation. The team checks your referral, region, affected side and relevant clinical information.
  2. Preparing for imaging. Items near the area that could affect image quality are removed as directed, with appropriate arrangements for prescribed supports.
  3. Positioning. The radiographer helps support the injured region in a suitable position. Tell the team if movement or pressure is painful.
  4. Image acquisition. The table moves into position and images are obtained while you remain still and follow instructions.
  5. Additional imaging if needed. Further views or contrast may be used according to the requested protocol.
  6. Completion. The radiographer checks image quality and explains any aftercare.

The radiographer obtains the images; a radiologist subsequently interprets them and prepares a report. You are not expected to diagnose the injury from the images yourself.

Benefits, radiation and limitations

CT provides detailed bony information quickly and may clarify a complex injury or treatment-planning question. A routine examination does not involve an incision.

CT uses ionising radiation. The expected clinical benefit and exposure are considered before scanning, and the protocol is selected to obtain useful information while managing exposure. Tell the team about pregnancy or possible pregnancy beforehand.

Movement and metalwork can affect image quality. CT does not assess every soft tissue injury or determine the safest treatment without clinical context. Contrast has additional suitability considerations and potential side effects if it is recommended.

Appointment length and aftercare

Image acquisition is usually brief. The appointment length depends on the region, mobility assistance, contrast and any additional views. Your centre will confirm how much time to allow.

Continue existing advice about immobilisation, activity and weight-bearing after the scan. A completed examination does not mean that the injury has healed or that unrestricted activity is safe.

If contrast is used, follow the centre’s observation and aftercare instructions, taking account of existing medical or fluid restrictions. Your injury may affect safe travel or driving independently of the scan.

Getting and understanding your results

Your scan images are reviewed by a consultant radiologist or relevant specialist clinician, who prepares a written imaging report. Results are usually available within three working days of the date of your scan. More complex examinations may require additional specialist review and can take slightly longer.

Once your results are available, a post-scan consultation will be arranged with the same medical doctor who conducted your pre-scan consultation. This continuity allows your doctor to consider the findings alongside the symptoms, medical history and concerns you discussed before your scan.

During the consultation, your doctor will explain the report in detail, answer your questions and discuss what the findings mean for you. Where further assessment or care is needed, they will explain the recommended next steps, which may include additional investigations, a specialist referral or follow-up with your usual healthcare team.

How much does a private fracture assessment CT cost?

PrivateScans CT scans start from £395. This is our general CT starting price. Your final cost depends on the chosen centre, body region and whether additional coverage or a specialist protocol is needed.

Our team will confirm the examination, price and included services before you proceed. Further treatment, surgery or rehabilitation is separate from the scan booking.

Book CT Fracture Assessment

Arrange a private fracture assessment CT

Your booking includes a 30-minute private telephone consultation with a medical doctor at a convenient time. The doctor will discuss the injury, symptoms, previous imaging and treatment before advising whether CT is clinically appropriate.

Where imaging is indicated, the referral identifies the region, affected side and question the scan needs to answer. This helps the scanning team plan the examination and gives the radiologist relevant context.

You can explore our other CT body part examinations. A significant acute injury or other urgent concern should be assessed promptly rather than waiting for a routine appointment.

FAQs

Does every fracture need CT?

No. Examination and X-rays are sufficient for many injuries. CT is considered when additional bony detail could influence care.

Can CT miss a fracture?

Yes. No test is perfect, and some occult or early stress injuries may be better assessed with MRI. Persistent symptoms or ongoing clinical concern may need further review.

Does the scan include my whole body?

No. A routine fracture assessment focuses on the region specified in the referral. Additional regions need to be agreed beforehand.

Should I remove my cast or splint?

Do not remove prescribed support without advice. Tell the centre what you are using so that appropriate arrangements can be made.

Will I need contrast?

Many routine bony fracture examinations do not require an injection. The team will explain if contrast is recommended for a separate clinical question.

Can CT show whether a fracture has healed?

It may help assess a specific healing or fusion concern, but findings are interpreted with symptoms, examination and previous images. Activity clearance requires clinical advice.

When will my results be available?

Results are usually available within three working days of your scan. More complex examinations can take slightly longer. A post-scan consultation will be arranged with the same doctor who conducted your pre-scan consultation to explain the findings and any necessary next steps.

What’s included with your scan?

What is included with your scan:

  • A pre-scan telephone consultation with a member of our medical team.
  • A written medical referral prepared from the information discussed during your consultation, where clinically appropriate.
  • Your scan at the chosen scanning centre.
  • A written imaging report prepared by a consultant radiologist or relevant specialist clinician.
  • Access to downloadable copies of your scan images where required.
  • A post-scan consultation to discuss your results and next steps where needed.
Can we help?